pipe corrosion

Posted by & filed under Pipe Corrosion.

Are you concerned about the corrosion of pipes at your business?

According to the American Galvanizer’s Association, the cost of pipeline corrosion in the United States is approximately $9 billion annually.

These costs can have a significant impact on your company’s bottom line. But the good news is that you can be in better control of the corrosion of your pipes by being proactive.

It also helps to understand why corrosion takes place and what you can do to stop it.

Read on to learn the main causes of pipe corrosion!

Abnormal pH Levels

The pH level of the liquid flowing through your pipes can have a major impact on its lifespan.

The pH of water, for example, is a measurement of the acidity of that liquid and ranges from 0 to 14. It’s important that the pH level of the liquids flowing through your pipes is monitored by your employees.

It’s best that the pH range falls between 7.0 and 8.4. Any level lower than 7.0 or higher than 8.4 can cause corrosion to your pipes over time.

Poor Soldering of Pipes

Preventing steel pipe corrosion begins from the time those pipes are installed on your system.

You should ensure your company is using someone that is highly trained to solder pipes correctly. When someone solders two pipes together, they are using fire to melt connect two separate pieces and make them one.

While this may sound like an easy process, it’s crucial that pipes are soldered together properly. Otherwise, your business runs the risk that a pipe will have higher amounts of acid in them.

This will make your pipes more susceptible to corrosion and can create problems with flow.

High Flow Rate

Piping corrosion can also be caused by prolonged exposure to the velocity of flowing water that is too high.

Your employees must be careful not to send water shooting through pipes at a high flow rate. That’s because it can cause the pipes to wear down and become more susceptible to corrosion.

By being sure water flows into a pipe at a safe speed, your business is helping to guard against a corroded pipe.

Using Too Much Chlorine

Your business should pay attention to the amount of chlorine or other disinfectants that you are adding to liquids that go through the pipes.

Chlorine is often used by cities and private businesses to help clean up the water supply. Although chlorine can be helpful when used this way, high quantities of it can create issues for your pipes.

This is because chlorine compromises the structure of the metallic materials in your pipes. When these components are weakened, it makes them more prone to starting to corrode prematurely.

Wrapping Up: Prevent Pipe Corrosion

Preventing pipe corrosion can help save your business time and money in the long run.

You can do this by taking an active role in monitoring your pipes or installing a system to protect them. It can also help to be careful to avoid participating in activities that can make your pipes begin to corrode.

Dynagard is a pipeline corrosion protection system built to resist corrosion through its unique adhesive design. Contact us today to learn more about how our system can help protect your pipes!

Leave a Reply

Your email address will not be published. Required fields are marked *