Eroding pipes can be a nightmare to deal with if you don’t catch them before they burst. Prevent pipe corrosion with pipe saddles, which are designed to insulate pipes and get rid of the risk of pipe corrosion. This is done by preventing moisture from soaking through, as well as preventing metal on metal contact. It’s also done without any chemical mixing, straps, or hot work. Keep reading for more information on the causes of pipe erosion and how you can prevent it.
The pH Of The Material Is Off-Balance
Even something as basic as pH can impact pipe erosion. For example, the pH of water is 6.5 to 8.5, with pure water being 7. If you have copper water pipes, anything below the lower end of this range could negatively impact the pipes by causing corrosion. Be sure you do some research and have proper testing equipment in place to prevent any pipe erosion before it becomes a bigger problem. Pipe corrosion prevention is key to maintaining solid structures.
Chemical Makeup Of Material
The chemical makeup of gas is different from that of oil, and they are both different from that of water. Each of these is going to have a different impact on pipelines. Pipeline corrosion prevention tips include sealing the interior of the pipes with something such as epoxy or using a lubricant to coat the inside of the pipes. Of course, this should be compatible with whatever flows through the pipes. Another tip is to insulate pipes with pipe pads, which prevent metal-on-metal contact. Exterior protection is as important as interior protection.
Temperature And Velocity Of Material
Believe it or not, the temperature and how fast the material is moving through a pipe impact how quickly pipes erode. The individual particles of that material, whether it’s oil or water, eat away at the surface of the pipes causing a decrease in the long-term pipeline integrity. The faster the material moves, the faster it eats away at the pipes. While that is not something that can necessarily be mitigated, at least not without a chemist, a pipe wear pad can protect the exterior of pipes, preventing moisture penetration. This will offer some protection when you cannot avoid other sources of erosion.
How To Prevent Pipeline Erosion
Pipeline erosion can be a serious issue, so use some of these corrosion protection methods:
- Get top-notch testing equipment for whatever material the pipes are transporting
- Structurally accommodate for high pressure points and weak spots
- Insulate pipes with pipe wear pads to prevent metal on metal contact and moisture penetration
Pipeline erosion protection starts with pipe corrosion prevention. That includes structurally accommodating for weak points, insulating pipes with pipe wear pads, and having access to accurate testing equipment.
Find out how we can help you insulate pipes to prevent pipeline corrosion.
Leave a Reply